BuildToolsHub US Construction Calculators

Concrete & Cement

Concrete Column Calculator

Find concrete volume for round or rectangular columns and piers.

Loading tool…

Educational US estimate only. Not engineering, structural, code, or professional construction advice. Mix designs, codes, and local conditions vary — verify with licensed professionals and your building department.

Estimator methodology

BuildToolsHub takeoffs separate net measured quantities from ordered quantities. Ordered qty = net × condition-based waste, then rounded for plant or package sizes (e.g. ready-mix to the nearest 0.5 yd³).

  • Concrete bags: Quikrete / SAKRETE published yields (80 lb ≈ 0.60 ft³). Ready-mix contingencies follow ASTM C94 purchaser practice.
  • Rebar: CRSI published lb/ft tables; optional lap allowance ≈ 40× bar diameter (confirm with drawings).
  • Roofing: NRCA squares (100 ft²); pitch factor √(1+(rise/12)²); ~3 bundles/square for standard shingles.
  • Aggregates / fill: ASTM C29-style densities; swell/compaction allowances for haul and place volumes.
  • Masonry: BIA / NCMA common unit factors (e.g. ~1.125 CMU/ft² for 8×16 face).

Use the Order tab for a supplier call sheet and the Assumptions panel for the exact factors applied to this run.

Why use Concrete Column Calculator

Calculate poured concrete for structural columns, deck piers, and fence posts. Choose circular or rectangular section geometry and enter height.

Always verify pier diameter, embedment, and mix strength against project drawings and local frost-depth requirements.

How to use

  1. Enter job dimensions. Pick a pour/layout condition to set industry waste %, or choose Custom.
  2. Review Net vs Order on the Summary tab — order the rounded quantity, not net alone.
  3. Open the Order tab for a supplier checklist, then print, export CSV, or share the link.

Related searches

  • concrete column
  • pier concrete
  • round pier volume
  • column cubic yards
  • deck pier calculator
  • concrete column calculator
  • free concrete column calculator
  • online concrete column calculator
  • buildtoolshub construction calculator

About Concrete Column Calculator

How do I measure a round column?

Enter diameter and height. The engine treats the column as a cylinder for volume.

Do I include the footing volume?

No. Use the footing calculator for pads and the column calculator for the shaft above.

What waste percent works for piers?

Often 5–10%. Augered holes may need more if soil caves or water is present.

Is this professional engineering advice?

No. Educational estimates only. Verify with a licensed professional and local codes.

Related tools