BuildToolsHub US Construction Calculators

Plumbing Takes

PEX Tubing Estimator

Estimate PEX tubing length for branch layouts.

Loading tool…

Educational US estimate only. Not engineering, structural, code, or professional construction advice. Mix designs, codes, and local conditions vary — verify with licensed professionals and your building department.

Estimator methodology

BuildToolsHub takeoffs separate net measured quantities from ordered quantities. Ordered qty = net × condition-based waste, then rounded for plant or package sizes (e.g. ready-mix to the nearest 0.5 yd³).

  • Concrete bags: Quikrete / SAKRETE published yields (80 lb ≈ 0.60 ft³). Ready-mix contingencies follow ASTM C94 purchaser practice.
  • Rebar: CRSI published lb/ft tables; optional lap allowance ≈ 40× bar diameter (confirm with drawings).
  • Roofing: NRCA squares (100 ft²); pitch factor √(1+(rise/12)²); ~3 bundles/square for standard shingles.
  • Aggregates / fill: ASTM C29-style densities; swell/compaction allowances for haul and place volumes.
  • Masonry: BIA / NCMA common unit factors (e.g. ~1.125 CMU/ft² for 8×16 face).

Use the Order tab for a supplier call sheet and the Assumptions panel for the exact factors applied to this run.

Why use PEX Tubing Estimator

Estimate PEX tubing needs by summing supply runs, including home-run lengths to a manifold.

Expansion, support spacing, and bend radius follow manufacturer rules.

How to use

  1. Enter job dimensions. Pick a pour/layout condition to set industry waste %, or choose Custom.
  2. Review Net vs Order on the Summary tab — order the rounded quantity, not net alone.
  3. Open the Order tab for a supplier checklist, then print, export CSV, or share the link.

Related searches

  • PEX calculator
  • PEX tubing length
  • manifold plumbing
  • PEX takeoff
  • pex tubing estimator
  • free pex tubing estimator
  • online pex tubing estimator
  • buildtoolshub construction calculator

About PEX Tubing Estimator

Home-run vs trunk-and-branch?

Home-runs use more tubing length but fewer fittings.

Color coding?

Red/blue indicate intended use; length math is the same.

Coil waste?

Allow extra for routing mistakes and future service loops.

Is this professional engineering advice?

No. Educational estimates only. Verify with a licensed professional and local codes.

Related tools