BuildToolsHub US Construction Calculators

Excavation & Earthwork

Fill Compaction Calculator

Estimate fill volumes accounting for compaction shrinkage.

Loading tool…

Educational US estimate only. Not engineering, structural, code, or professional construction advice. Mix designs, codes, and local conditions vary — verify with licensed professionals and your building department.

Estimator methodology

BuildToolsHub takeoffs separate net measured quantities from ordered quantities. Ordered qty = net × condition-based waste, then rounded for plant or package sizes (e.g. ready-mix to the nearest 0.5 yd³).

  • Concrete bags: Quikrete / SAKRETE published yields (80 lb ≈ 0.60 ft³). Ready-mix contingencies follow ASTM C94 purchaser practice.
  • Rebar: CRSI published lb/ft tables; optional lap allowance ≈ 40× bar diameter (confirm with drawings).
  • Roofing: NRCA squares (100 ft²); pitch factor √(1+(rise/12)²); ~3 bundles/square for standard shingles.
  • Aggregates / fill: ASTM C29-style densities; swell/compaction allowances for haul and place volumes.
  • Masonry: BIA / NCMA common unit factors (e.g. ~1.125 CMU/ft² for 8×16 face).

Use the Order tab for a supplier call sheet and the Assumptions panel for the exact factors applied to this run.

Why use Fill Compaction Calculator

Estimate how much loose fill to order so compacted in-place volume meets design grades.

Compaction percentages depend on material and method—use geotech guidance when available.

How to use

  1. Enter job dimensions. Pick a pour/layout condition to set industry waste %, or choose Custom.
  2. Review Net vs Order on the Summary tab — order the rounded quantity, not net alone.
  3. Open the Order tab for a supplier checklist, then print, export CSV, or share the link.

Related searches

  • fill calculator
  • compaction volume
  • shrink factor
  • compacted fill yards
  • fill compaction calculator
  • free fill compaction calculator
  • online fill compaction calculator
  • buildtoolshub construction calculator

About Fill Compaction Calculator

Why order more than in-place volume?

Compaction reduces volume; loose material shrinks when densified.

What shrink factor is typical?

It varies widely by soil type; sandy fills differ from clay.

Lift thickness?

Place fill in lifts per specs; this tool estimates total volume only.

Is this professional engineering advice?

No. Educational estimates only. Verify with a licensed professional and local codes.

Related tools