BuildToolsHub US Construction Calculators

Drywall & Insulation

Vapor Barrier Calculator

Estimate poly sheeting rolls for floors and walls.

Loading tool…

Educational US estimate only. Not engineering, structural, code, or professional construction advice. Mix designs, codes, and local conditions vary — verify with licensed professionals and your building department.

Estimator methodology

BuildToolsHub takeoffs separate net measured quantities from ordered quantities. Ordered qty = net × condition-based waste, then rounded for plant or package sizes (e.g. ready-mix to the nearest 0.5 yd³).

  • Concrete bags: Quikrete / SAKRETE published yields (80 lb ≈ 0.60 ft³). Ready-mix contingencies follow ASTM C94 purchaser practice.
  • Rebar: CRSI published lb/ft tables; optional lap allowance ≈ 40× bar diameter (confirm with drawings).
  • Roofing: NRCA squares (100 ft²); pitch factor √(1+(rise/12)²); ~3 bundles/square for standard shingles.
  • Aggregates / fill: ASTM C29-style densities; swell/compaction allowances for haul and place volumes.
  • Masonry: BIA / NCMA common unit factors (e.g. ~1.125 CMU/ft² for 8×16 face).

Use the Order tab for a supplier call sheet and the Assumptions panel for the exact factors applied to this run.

Why use Vapor Barrier Calculator

Calculate poly vapor barrier area needs including overlaps for floors or walls.

Whether a vapor barrier is required depends on climate and assembly design.

How to use

  1. Enter job dimensions. Pick a pour/layout condition to set industry waste %, or choose Custom.
  2. Review Net vs Order on the Summary tab — order the rounded quantity, not net alone.
  3. Open the Order tab for a supplier checklist, then print, export CSV, or share the link.

Related searches

  • vapor barrier
  • poly sheeting
  • vapor retarder rolls
  • 6 mil poly
  • vapor barrier calculator
  • free vapor barrier calculator
  • online vapor barrier calculator
  • buildtoolshub construction calculator

About Vapor Barrier Calculator

How much overlap?

Often 6–12 inches—overlaps reduce net coverage.

6-mil vs 10-mil?

Thickness is a durability/spec choice; area math is the same.

Is this a Class I retarder?

Poly is typically Class I; confirm if that is appropriate.

Is this professional engineering advice?

No. Educational estimates only. Verify with a licensed professional and local codes.

Related tools