BuildToolsHub US Construction Calculators

Area, Volume & Units

Construction Unit Converter

Convert length, area, and volume units used on jobsites.

Loading tool…

Educational US estimate only. Not engineering, structural, code, or professional construction advice. Mix designs, codes, and local conditions vary — verify with licensed professionals and your building department.

Estimator methodology

BuildToolsHub takeoffs separate net measured quantities from ordered quantities. Ordered qty = net × condition-based waste, then rounded for plant or package sizes (e.g. ready-mix to the nearest 0.5 yd³).

  • Concrete bags: Quikrete / SAKRETE published yields (80 lb ≈ 0.60 ft³). Ready-mix contingencies follow ASTM C94 purchaser practice.
  • Rebar: CRSI published lb/ft tables; optional lap allowance ≈ 40× bar diameter (confirm with drawings).
  • Roofing: NRCA squares (100 ft²); pitch factor √(1+(rise/12)²); ~3 bundles/square for standard shingles.
  • Aggregates / fill: ASTM C29-style densities; swell/compaction allowances for haul and place volumes.
  • Masonry: BIA / NCMA common unit factors (e.g. ~1.125 CMU/ft² for 8×16 face).

Use the Order tab for a supplier call sheet and the Assumptions panel for the exact factors applied to this run.

Why use Construction Unit Converter

Convert between inches, feet, yards, meters, square feet, and cubic yards for takeoffs.

Always keep units consistent inside a single calculation chain.

How to use

  1. Enter job dimensions. Pick a pour/layout condition to set industry waste %, or choose Custom.
  2. Review Net vs Order on the Summary tab — order the rounded quantity, not net alone.
  3. Open the Order tab for a supplier checklist, then print, export CSV, or share the link.

Related searches

  • unit converter
  • cubic yards conversion
  • feet to meters
  • construction units
  • construction unit converter
  • free construction unit converter
  • online construction unit converter
  • buildtoolshub construction calculator

About Construction Unit Converter

How many cubic feet in a cubic yard?

27 cubic feet equal 1 cubic yard.

Square yards to square feet?

Multiply square yards by 9.

Metric on US plans?

Convert carefully—do not mix unit systems mid-calc.

Is this professional engineering advice?

No. Educational estimates only. Verify with a licensed professional and local codes.

Related tools