BuildToolsHub US Construction Calculators

Masonry & Brick

Masonry Wall Ties Calculator

Estimate wall tie quantity for veneer and cavity walls.

Loading tool…

Educational US estimate only. Not engineering, structural, code, or professional construction advice. Mix designs, codes, and local conditions vary — verify with licensed professionals and your building department.

Estimator methodology

BuildToolsHub takeoffs separate net measured quantities from ordered quantities. Ordered qty = net × condition-based waste, then rounded for plant or package sizes (e.g. ready-mix to the nearest 0.5 yd³).

  • Concrete bags: Quikrete / SAKRETE published yields (80 lb ≈ 0.60 ft³). Ready-mix contingencies follow ASTM C94 purchaser practice.
  • Rebar: CRSI published lb/ft tables; optional lap allowance ≈ 40× bar diameter (confirm with drawings).
  • Roofing: NRCA squares (100 ft²); pitch factor √(1+(rise/12)²); ~3 bundles/square for standard shingles.
  • Aggregates / fill: ASTM C29-style densities; swell/compaction allowances for haul and place volumes.
  • Masonry: BIA / NCMA common unit factors (e.g. ~1.125 CMU/ft² for 8×16 face).

Use the Order tab for a supplier call sheet and the Assumptions panel for the exact factors applied to this run.

Why use Masonry Wall Ties Calculator

Estimate metal wall ties or anchors based on wall area and horizontal/vertical spacing.

Spacing rules vary by code and wind zone. Confirm required density with specifications.

How to use

  1. Enter job dimensions. Pick a pour/layout condition to set industry waste %, or choose Custom.
  2. Review Net vs Order on the Summary tab — order the rounded quantity, not net alone.
  3. Open the Order tab for a supplier checklist, then print, export CSV, or share the link.

Related searches

  • wall ties
  • brick ties calculator
  • veneer anchors
  • cavity wall ties
  • masonry wall ties calculator
  • free masonry wall ties calculator
  • online masonry wall ties calculator
  • buildtoolshub construction calculator

About Masonry Wall Ties Calculator

What spacing is typical?

Often around one tie per 2–3 sq ft depending on code and conditions—verify locally.

Do openings need extra ties?

Yes. Edges of openings often need closer spacing per detailing.

Are brick ties the same as seismic anchors?

Products differ. Match the specified connector type and corrosion protection.

Is this professional engineering advice?

No. Educational estimates only. Verify with a licensed professional and local codes.

Related tools